You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

AFG

GREY ACRYLIC FOAM TAPEfrom 0.25 mm to 3.00 mm

AFG

Features

Grey acrylic foam tape, solvent acrylic adhesive, red plastic liner. Highly adhesive product, excellent resistance to plasticisers, oils, solvents, detergents, moisture and UV radiation. High-performance viscoelasticgrey acrylic adhesive mass, designed to withstand heavy loads and can replace screws and rivets in many industrial processes. Excellent resistance to temperature and plasticizers, oils, solvents, detergents, moisture and UV light.

 

Application fields

Recommended for fixing surfaces such as glass, metals, ceramics, wood, plastics, automotive, profiles, suitable for both indoor and outdoor use, with excellent load-bearing capacity and temperature resistance.

AFG-25: 0.25 mm thick - white paper
AFG-40: thickness 0.40 mm - red PE film
AFG-80: thickness 0.80 mm - red PE film
AFG-100: 1.00 mm thick - red PE film
AFG-150: 1.50 mm thick - red PE film
AFG-200: 2.00 mm thick - red PE film
AFG-250: 2.50 mm thick - red PE film
AFG-300: 3.00 mm thick - red PE film

Minimum cutting width of 4.00 mm
Support grey viscoelastic acrylic mass
Adhesive high-performance solvent acrylic
Type of product double-sided tape
Static Shear >183 hours (1,000g, resists more than 11,000 minutes at 20°C)
Resistance to temperature -30° +150°C
Application temperature tra 18°C e 35°C
Shelf life 12 months

 

PDF   AFG-25 > Download data sheet PDF   AFG-40 > Download data sheet PDF   AFG-80 > Download data sheet PDF   AFG-100 > Download data sheet PDF   AFG-150 > Download data sheet PDF   AFG-200 > Download data sheet PDF   AFG-250 > Download data sheet PDF   AFG-300 > Download data sheet

The above characteristics are based on results obtained from rigorous testing and calculation. However, although perfectly reliable, they are not guaranteed and the user must check the suitability of the product by consulting us if there is any doubt about particular applications. The product should be stored in a dry, well ventilated area at a temperature of approximately 20°C and should be protected from continuous exposure to sunlight. Apply on well dried and clean surfaces..

The line consists of: