Double-sided black PU to open-cell foam, thickness 1.10 mm, density 380 kg/m³, acrylic solvent adhesive, yellow siliconized paper liner. Excellent resistance to UV rays, plasticisers and solvents.
Recommended for interior applications, fixing plates, plastics, profiles, panels and glass. Indispensable for assembling, fixing, filling, stabilising, eliminating vibrations, etc.
• height 1020 mm
• length 300 m
• 3" cardboard core
• height 1020 mm
• length from 5 to 50 mm
• 3" cardboard core
• variable cutting-roll from 4 to 1020 mm
• length from 5 to 50 m
• 3" cardboard core
| Thickness | 1.10 mm |
| Protective liner | yellow siliconized paper 110g/m² |
| Carrier | black polyurethane foam |
| Density | 380 kg/m³ |
| Adhesive | solvent acrylic |
| Available widths | from 4 to 1,020 mm |
| Available lengths | up to 300 m |
| Product type | double-sided adhesive tape |
| Adhesivity on steel (PSTC1) | 18 +/- 2 N/25 mm |
| Static Shear | ≥170 hours |
| Rolling ball tack | < 10 cm |
| Resistance to temperature | - 40° + 120°C |
| Application temperature | between 18°C & 35°C |
| Shelf life | 12 months |
The characteristics indicated are based on results obtained from rigorous testing and calculations. While considered reliable, they are not guaranteed; users are therefore advised to verify the suitability of the product and contact us in case of any doubts regarding specific applications. The product should be stored in a dry, well-ventilated environment at approximately 20°C and protected from direct sunlight. Apply only to clean, dry surfaces.
Download product data sheet
