Double-sided adhesive tape with white PVC backing, thickness 0.22 mm, modified solvent acrylic adhesive, brown bisiliconated paper liner. Excellent resistance to plasticisers and UV rays.
Thanks to its excellent adhesion, it is suitable for mounting rubber, plastic and aluminium profiles, for bonding plates and displays, and for surfaces that are difficult to apply to.
• height da 1250 mm
• length 500 m
• 3" cardboard core
• height 1250 mm
• length from 10 to 100 m
• 3" cardboard core
• variable cutting-roll from 4 to 1250 mm
• length from 10 to 100 m
• 3" cardboard core
| Thickness | 220 µm (0,22 mm) |
| Protective liner | havana bisiliconed paper 110 g/m² |
| Carrier | white polyvinyl chloride |
| Adhesive | Modified solvent acrylic |
| Available widths | from 4 to 1250 mm |
| Available lengths | up to 500 m |
| Product type | Double-sided adhesive tape |
| Adesivity on steel (PSTC1) | 22 +/- 2 N/25 mm |
| Rolling ball tack | < 10 cm |
| Resistance to temperature | -30° +80°C |
| Application temperature | between 18°C & 35°C |
| Shelf life | 12 months |
The above characteristics are based on results obtained from rigorous testing and calculation. However, although perfectly reliable, they are not guaranteed and the user must check the suitability of the product by consulting us if there is any doubt about particular applications. The product should be stored in a dry, well ventilated area at a temperature of approximately 20°C and should be protected from continuous exposure to sunlight. Apply on well dried and clean surfaces.
Download product data sheet
