Double-sided adhesive tape made of non-woven fabric, thickness 0.10 mm, solvent-based acrylic adhesive, white bisiliconated paper liner.
Suitable for multiple applications such as bonding fabrics for samples, paper, cardboard, plates and untreated plastics.
Product also available in version S975R
• height 1250 mm
• length 1000 m
• 3" cardboard core
• height 1250 mm
• length from 25 to 250 m
• 3" cardboard core
• variable cutting-roll from 4 to 1250 mm
• length from 25 to 250 m
• 3" cardboard core
| Thickness | 100 µm (0.10 mm) |
| Protective liner | white bisilicon-coated paper 110 g/m² |
| Carrier | non-woven fabric |
| Adhesive | solvent acrylic |
| Available widths | from 4 to 1250 mm |
| Available lengths | up to 1000 m |
| Product type | Double-sided adhesive tape |
| Adesivity on steel (PSTC1) | 15 +/- 2 N/25 mm |
| Rolling ball tack | < 10 cm |
| Resistance to temperature | -40° +120°C |
| Application temperature | between 18°C & 35°C |
| Shelf life | 12 months |
The above characteristics are based on results obtained from rigorous testing and calculation. However, although perfectly reliable, they are not guaranteed and the user must check the suitability of the product by consulting us if there is any doubt about particular applications. The product should be stored in a dry, well ventilated area at a temperature of approximately 20°C and should be protected from continuous exposure to sunlight. Apply on well dried and clean surfaces.
Download product data sheet
