White PE double-sided closed-cell foam, 1.00 mm thick, density 67 kg/m³, acrylic solvent adhesive, white bisilicon paper liner. Good resistance to plasticisers, oils, solvents and UV radiation.
Suitable for interior applications, fixing plates, plastics, profiles, mirrors and glass. Indispensable for assembling, fixing, filling, stabilising, eliminating vibrations, etc.
• height 1250 mm
• length 300 m
• 3" cardboard core
• height 1250 mm
• length from 5 to 66 mm
• 3" cardboard core
• variable cutting-roll from 4 to 1250 mm
• length from 1,5 to 66 m
• 3" cardboard core
• 1" regenerated plastic core (on request)
| Thickness | 1,00 mm |
| Protective liner | white bisilicon-coated paper 110 g/m² |
| Carrier | white polyethylene foam |
| Density | 67 kg/m³ |
| Adhesive | solvent acrylic |
| Available widths | from 4 to 1,250 mm |
| Available lengths | up to 300 m |
| Product type | Double-sided adhesive tape |
| Adesivity on steel (PSTC1) | 15 +/- 2 N/25 mm |
| Static Shear | ≥170 hours |
| Rolling ball tack | < 10 cm |
| Resistance to temperature | - 30° + 100°C |
| Application temperature | between 18°C & 35°C |
| Shelf life | 12 months |
The above characteristics are based on results obtained from rigorous testing and calculation. However, although perfectly reliable, they are not guaranteed and the user must check the suitability of the product by consulting us if there is any doubt about particular applications. The product should be stored in a dry, well ventilated area at a temperature of approximately 20°C and should be protected from continuous exposure to sunlight. Apply on well dried and clean surfaces.
Download product data sheet
