Other sizes available on request up to 610 mm x 18 m
Coarse-grained (36 grit) corundum anti-slip tape with modified solvent-based acrylic adhesive. Thanks to the thickness of the grain, it is necessary for extreme applications where normal anti-slip tape would not work due to the accumulation of dirt, mud and debris. R13 certified according to the slip resistance criteria set out in the new UNI EN 16165:2021 and DIN EN 16165:2023-02 standards (i.e. the highest level of safety and maximum possible slip resistance). Excellent resistance to foot traffic, atmospheric agents, UV rays, oils, detergents and solvents.
Recommended for outdoor use. Product particularly suitable for extreme applications where normal anti-slip tape would not work due to the presence of mud and accumulation of various debris such as agricultural vehicles, construction site vehicles, tanks, etc.
• height 610 mm
• length 91 m
• 3" cardboard core
• height 610 mm
• length 18 m
• 3" cardboard core
• standard cutting step from 19 to 610 mm
• length 18 m
• 3" cardboard core
Standard sizes and quantities per box
| ROLLS SIZE | ROLLS/BOX |
|---|---|
| 19 mm x 18 m | 20 |
| 25 mm x 18 m | 16 |
| 50 mm x 18 m | 8 |
| 100 mm x 18 m | 4 |
Other sizes available on request up to 610 mm x 18 m
Standard and customisable formats: sizes, shapes and profiles chosen by the customer
Standard sizes and quantities per box
| STRIPS SIZE | STRIPS/BOX |
|---|---|
| 19 mm x 600 mm | 500 |
| 150 mm x 600 mm | 50 |
Black, single variant
| Thickness | 36 grit |
| Protective liner | white monosiliconated paper |
| Carrier | corundum abrasive particles |
| Adhesive | modified solvent acrylic |
SL SAFETY TREAD, ANTISLIP and COARSE tapes have been found to comply with slip resistance testing, in accordance with the standards set out in the new UNI EN 16165:2021 and DIN EN 16165:2023-02 regulations, obtaining an R13 classification, which is the highest level of safety and the maximum degree of anti-slip effectiveness possible. > More info on certification
The above characteristics are based on results obtained from rigorous tests and calculations. However, although perfectly reliable, they are not guaranteed and the user must check the suitability of the product by consulting us if there are any doubts about particular applications. The product must be stored in a dry, well-ventilated environment at a temperature of approximately 20°C and must be protected from continuous exposure to sunlight. Apply to surfaces that are completely dry and clean.
Download product data sheet
