AFT

ORDER ONLINE

Features

Transparent acrylic foam, solvent acrylic adhesive, red plastic liner. Viscoelastic acrylic adhesive to elevate performance. Product with an extremely high adhesive strength, designed to resist heavy loads and can replace screws and rivets in many industrial processes. Resists well to plastifiers, oils, solvents, detergents, humidity and UV rays.

Application fields

Recommended for fixing surfaces such as glass, metals, ceramics, wood, plastic, profiles. Indicated for both internal and external use, with excellent load capacity and temperature resistance.

The line consists of:

ORDER ONLINE

Sales formats

AFT
> Log

• height 1020 mm
• length from 16.5 to 33 m
• 3" plastic core

AFT
> Cut rolls

• variable cutting-roll from 4 to 1020 mm
• length from 1,5 to 33 m
• 3" plastic core
• 1" regenerated plastic core
(on request cod. AFT100)

AFT50: thickness 0.50 mm - red PE film coating
AFT100: thickness 1,00 mm - red PE film coating
AFT150: thickness 1,50 mm - red PE film coating
AFT200: thickness 2,00 mm - red PE film coating

Cut-roll	from 4 mm
Carrier	transparent viscoelastic acrylic mass
Adhesive	High-performance solvent acrylic

Product type	Double-sided adhesive tape
Static Shear	> 183 hours (1,000g, resists more than 11,000 minutes at 20°C)
Resistance to temperature	-30° +150°C
Application temperature	between 18°C & 35°C
Shelf life	12 months

AFT50 > Download product data sheet AFT100 > Download product data sheet AFT150 > Download product data sheet AFT200 > Download product data sheet

The above characteristics are based on results obtained from rigorous testing and calculation. However, although perfectly reliable, they are not guaranteed and the user must check the suitability of the product by consulting us if there is any doubt about particular applications. The product should be stored in a dry, well ventilated area at a temperature of approximately 20°C and should be protected from continuous exposure to sunlight. Apply on well dried and clean surfaces.