This is a double-sided, black, open-cell PU foam with a thickness of 0.50 mm, a density of 380 kg/m³ and a modified solvent acrylic adhesive. It has a red plastic liner. It offers good resistance to plasticisers, oils, solvents and UV radiation.
It is recommended for fixing plates, plastics, profiles, panels and glass. It is indispensable for assembling, fixing, filling, stabilising and eliminating vibrations.
• height 1020 mm
• length 300 m
• 3" cardboard core
• height 1020 mm
• length from 5 to 66 m
• 3" cardboard core
• variable cutting-roll from 4 to 1020 mm
• length from 5 to 66 m
• 3" cardboard core
| Thickness | 0.50 mm |
| Protective liner | 80 micron red plastic film |
| Carrier | black polyurethane foam |
| Density | 380 kg/m³ |
| Adhesive | modified solvent acrylic |
| Available widths | from 4 to 1,020 mm |
| Available lengths | up to 300 m |
| Product type | double-sided adhesive tape |
| Adhesivity on steel (PSTC1) | 18 +/- 2 N/25 mm |
| Static Shear | ≥170 hours |
| Rolling ball tack | < 10 cm |
| Resistance to temperature | - 40° + 120°C |
| Application temperature | between 18°C & 35°C |
| Shelf life | 12 months |
The characteristics indicated are based on results obtained from rigorous testing and calculations. While considered reliable, they are not guaranteed; users are therefore advised to verify the suitability of the product and contact us in case of any doubts regarding specific applications. The product should be stored in a dry, well-ventilated environment at approximately 20°C and protected from direct sunlight. Apply only to clean, dry surfaces.
Download product data sheet
