S978R REVERSE WOUND
Product reversed for use with our handy ATG Top Gun dispenser and any ATG System applicator available on the market.
| S978R | ROT/ BOX |
| 6 mm x 33 m | 144 |
| 6 mm x 33 m * P core | 144 |
| 9 mm x 33 m | 96 |
| 12 mm x 33 m | 72 |
| 19 mm x 33 m | 48 |
Product reversed for use with our handy ATG Top Gun dispenser and any ATG System applicator available on the market.
| S978R | ROT/ BOX |
| 6 mm x 33 m | 144 |
| 6 mm x 33 m * P core | 144 |
| 9 mm x 33 m | 96 |
| 12 mm x 33 m | 72 |
| 19 mm x 33 m | 48 |
Double-sided, 0.08 mm thick non-woven tape, modified solvent acrylic adhesive, brown disiliconed paper liner.
Tape suitable for mounting metal and plastic plates, adhesives for textiles and leather and other difficult to apply surfaces.
| Thickness | 80 µm (0.08 mm) |
| Protective liner | havana bisiliconized paper 110 g/m2 |
| Support | non-woven |
| Adhesive | solvent acrylic |
| Widths available | from 4 to 1250 mm |
| Available lengths | up to 1000 m |
| Type of product | double-sided tape |
| Adesivity on steel (PSTC1) | 25 +/- 2 N/25 mm |
| Rolling ball tack | < 10 cm |
| Resistance to temperature | -40° +150°C |
| Application temperature | between 18°C and 35°C |
| Shelf life | 12 months |
The above characteristics are based on results obtained from rigorous testing and calculation. However, although perfectly reliable, they are not guaranteed and the user must check the suitability of the product by consulting us if there is any doubt about particular applications. The product should be stored in a dry, well ventilated area at a temperature of approximately 20°C and should be protected from continuous exposure to sunlight. Apply on well dried and clean surfaces..
Download product data sheet