Black PE double-sided closed-cell foam, 1.00 mm thick, density 67 kg/m³, acrylic solvent adhesive, white siliconized paper liner. Good resistance to plasticisers, oils, solvents and UV radiation.
Suitable for interior applications, fixing plates, plastics, profiles, mirrors and glass. Indispensable for assembling, fixing, filling, stabilising, eliminating vibrations, etc.
• height 1020 mm
• length 300 m
• 3" cardboard core
• height 1020 mm
• length from 5 to 66 mm
• 3" cardboard core
• variable cutting-roll from 4 to 1020 mm
• length from 1,5 to 66 m
• 3" cardboard core
• 1" regenerated plastic core (on request)
| Thickness | 1,00 mm |
| Protective liner | white siliconized paper 110 g/m² |
| Carrier | black polyethylene foam |
| Density | 67 kg/m³ |
| Adhesive | solvent acrylic |
| Available widths | from 4 to 1,020 mm |
| Available lengths | up to 300 m |
| Product type | double-sided adhesive tape |
| Adhesivity on steel (PSTC1) | 15 +/- 2 N/25 mm |
| Static Shear | ≥170 hours |
| Rolling ball tack | < 10 cm |
| Resistance to temperature | - 30° + 100°C |
| Application temperature | between 18°C & 35°C |
| Shelf life | 12 months |
The characteristics indicated are based on results obtained from rigorous testing and calculations. While considered reliable, they are not guaranteed; users are therefore advised to verify the suitability of the product and contact us in case of any doubts regarding specific applications. The product should be stored in a dry, well-ventilated environment at approximately 20°C and protected from direct sunlight. Apply only to clean, dry surfaces.
Download product data sheet
