White PE double-sided closed-cell foam, 0.80 mm thick, solvent acrylic adhesive, white siliconized paper liner. Good resistance to plasticisers, oils, solvents and UV radiation.
This product is suitable for interior applications and for fixing plates, plastics, profiles, mirrors and glass. It is indispensable for assembling, fixing, filling, stabilising and eliminating vibrations.
• height 1250 mm
• length 300 m
• 3" cardboard core
• height 1250 mm
• length from 5 to 66 mm
• 3" cardboard core
• variable cutting-roll from 4 to 1250 mm
• length from 1,5 to 66 m
• 3" cardboard core
• 1" regenerated plastic core (on request)
| Thickness | 0,80 mm |
| Protective liner | white siliconized paper 110 g/m² |
| Carrier | white polyethylene foam |
| Density | 100 kg/m³ |
| Adhesive | solvent acrylic |
| Available widths | from 4 to 1,250 mm |
| Available lengths | up to 300 m |
| Product type | double-sided adhesive tape |
| Adhesivity on steel (PSTC1) | 18 +/- 2 N/25 mm |
| Static Shear | ≥170 hours |
| Rolling ball tack | < 10 cm |
| Resistance to temperature | - 30° + 100°C |
| Application temperature | between 18°C & 35°C |
| Shelf life | 12 months |
The characteristics indicated are based on results obtained from rigorous testing and calculations. While considered reliable, they are not guaranteed; users are therefore advised to verify the suitability of the product and contact us in case of any doubts regarding specific applications. The product should be stored in a dry, well-ventilated environment at approximately 20°C and protected from direct sunlight. Apply only to clean, dry surfaces.
Download product data sheet
