Double-sided black PE closed-cell foam, thickness 0.50 mm, density 125 kg/m³, modified solvent acrylic adhesive, red plastic liner. Excellent resistance to UV radiation and weathering.
Suitable for exterior applications, mounting of number plates, glass, panels and profiles in the automotive sector. Indispensable for assembling, fixing, filling, stabilising, eliminating vibrations, etc.
| Thickness | 0.50 mm |
| Protective liner | 80 micron red plastic film |
| Support | black polyethylene foam (PE) |
| Density | 125 Kg/m3 |
| Adhesive | modified solvent acrylic |
| Widths available | from 4 to 1020 mm |
| Available lengths | up to 300 m |
| Type of product | double-sided tape |
| Adesivity on steel (PSTC1) | 19 +/- 2 N/25 mm |
| Static Shear | ≥ 170 hours |
| Rolling ball tack | < 10 cm |
| Resistance to temperature | -30° +150°C |
| Application temperature | between 18°C and 35°C |
| Shelf life | 12 months |
The above characteristics are based on results obtained from rigorous testing and calculation. However, although perfectly reliable, they are not guaranteed and the user must check the suitability of the product by consulting us if there is any doubt about particular applications. The product should be stored in a dry, well ventilated area at a temperature of approximately 20°C and should be protected from continuous exposure to sunlight. Apply on well dried and clean surfaces..
Download product data sheet